The BPS format allows distributing patches that are smaller and that do
not contain copyrighted content if data is relocated
(unlike non-trivial IPS patches).
This is essential for games such as MM3D that have three barely
different code revisions. Supporting all three versions would
demand an unreasonable amount of work; with BPS patches only one
version has to be supported.
This changes ApplyCodePatch to return a ResultStatus, which makes it
possible to determine whether patch applying has failed. Previously,
only a boolean was returned, and false was returned when no patch
was found OR when a patch was found but applying it failed.
This also changes AppLoader_NCCH to return an error if patching fails
because the executable is likely to be left in an inconsistent state
and we should not proceed booting in that case.
This significantly reduces unnecessary disk writes and space usage
when building Citra.
libcore.a is now only ~1MB rather than several hundred megabytes.
Previously we would first attempt to use any buffer that was free,
meaning whichever buffer has already been displayed. This has poor
interactions when the operating system throttles the update rate of the
window, so if there isn't any free buffers available, just reuse the
oldest frame instead.
Simple cut/paste issue where initialized is only set to true when the
emulation attempts to init the Binary Pipe, but we used it to test if
the FFMPEG decoder was valid and disabled it if it wasn't. Just return
the value of have_ffmpeg_dl instead so when dynamic loading is added
it'll still work.
HACK
In Luigi's Mansion Dark Moon in HLE audio, the game mysteriously passes
in an extremely large value for length, which without any checks, causes
HLE audio to allocate an extremely large buffer.
This value seemingly is caused by some other HLE audio feature is missing,
and Luigi's Mansion subtracts two values to get a length, without
checking for overflow first. This appears to be caused by an incorrect
HLE audio emulation, as its fixed entirely by only changing to LLE. As
such, further investigation is required, but in the meantime, completely
eating up our users RAM is unacceptable.
The text shared memory wasn't supposed to be cleared according to my comparison with the LLE swkbd. This can cause issues in certain games such as Harvest Moon.
A null terminator is added to the text copied to mark the end of the string.
Fixes an issue where the touch point is incorrect in OpenGLWindow when the render
target is initialized for the first time with single window mode disabled.
While QOpenGLWidget sounds like a good idea, it has issues which are
harder to debug due to how Qt manages the context behind the scenes. We
could probably work around any of these issues over time, but its
probably easier to do it ourselves with a QWindow directly.
Plus using QWindow + createWindowContainer is the easiest to use
configuration for Qt + Vulkan so this is probably much better in the
long run.
Over time our config values have grown quite numerous in size.
Unfortunately it also makes the single functions we have for loading and
saving values more error prone.
For example, we were loading the core settings twice when they only
should have been loaded once. In another section, a variable was
shadowing another variable used to load settings from a completely
different section.
Finally, in one other case, there was an extraneous endGroup() call used
that didn't need to be done. This was essentially dead code and also a
bug waiting to happen.
This separates the section loading code into its own separate functions.
This keeps variables only visible to the code that actually needs it,
and makes it much easier to visually see the end of each individual
configuration group. It also makes it much easier to visually catch bugs
during code review.
While we're at it, this also uses QStringLiteral instead of raw string
literals, which both avoids constructing a lot of QString instances, but
also makes it much easier to disable implicit ASCII to QString and
vice-versa in the future via setting QT_NO_CAST_FROM_ASCII and
QT_NO_CAST_TO_ASCII as compilation flags.
We relies on UNREACHABLE's noreturn attribute to eliminate parent's "no return value" warning. However, this was wrapped in a `if(!false)` block, which compilers may not unfold to recognize the noreturn nature.
By default, DisplayRole is used as the SortRole.
This behaviour is what's expected by the user.
Made it so that an access to SortRole is equivalent to one to DisplayRole.
Also fixes a bug with directory sorting.
Also fix a small issue with incorrect shutdown ordering in SDL.
Previously the system would still be running so the telemetry task
didn't launch and detached_tasks would assert(count == 0)
Fixes a regression from #4862, which caused the NCCH title ID checking
heuristic to be skipped whenever the exheader is replaced.
I was thinking the heuristic wouldn't be needed in that case, but it
turns out that many users still have pathological NCCHs that indicate
they are encrypted but are actually decrypted...
Now the original exheader is always read and used for the heuristic
to determine whether the NCCH is actually encrypted; only then do we
load a replacement exheader (if it exists) to avoid affecting the
heuristic.
This single line mode is aimed at restoring the intended behavior with Small or None icons. Line breaks will be replaced with commas (Region row) or spaces (Name row). One can toggle this option in UI configuration.
This option was intended for enabling optimizations when all rows are granted to have the same height. In our case this is not true, and therefore the behavior is actually undefined. Different versions of Qt handle this differently. Newer versions of Qt tend to hide contents that are too big in height, which goes against our wishes. Thus, it's probably the best to disable this option so that things don't go wrong if we ever decide to update Qt.
Some titles (mostly homebrews) do not use the region free value 0x7FFF but instead set all of the region flags, resulting in all regions displayed in game list, which is not beautiful and not what we want. This fixes it by adding an all_regions check.
Separate options are now provided for FFmpeg AAC audio decoder and FFmpeg video dumper. This allows users to configure Citra with greater freedom.
Also, previously for Linux builds, AAC decoder is accidentally enabled along with the dumper, which could potentially cause patent issues (?). This commit fixes it by only enabling video dumper.
This widget provides a simple list of recorded requests as well as a simple filter and the 'Clear' button. Requests with status 'HLE Unimplemented' or 'Error' will be marked out with the red color.
This widget handles retrival of service name. For reasons refer to a previous commit message.
Added the widget to the Debugging menu, pretty much the same as other debugging widgets.
This is for displaying the service names. This function is only used in the frontend, because Recorder which is in the Kernel cannot and should not have access to SM in the System.
Pretty much the same as LLE requests, the 'translate' part is chosen. A function is added to the context class to record requests that involves unimplemented HLE functions.
The 'translate' function is a great place to put this in IMO as it is possible to get both untranslated and translated cmdbufs. However a kernel reference has to be passed here, but it is not too hard fortunately.
This class resides in Kernel mainly because that, it's hard for kernel objects to get references to the System (and therefore to the Recorder), while much easier for KernelSystem. If this is to be moved to System the code will likely get much more complex with System (or Recorder) references passed everywhere.
This is for displaying the function name for HLE requests. Probably it is possible to do the same for LLE ones but it would require having the HLE handlers available even when not using them, which doesn't seem to make sense and is more of a hack than a proper solution in my opinion.
Added a new state amiibo_in_range. This state is akin to the real world
physical relationship between a 3DS machine and an amiibo, which is
independent from the service state (or even the machine is powered on or
not). The service state nfc_tag_state is then synchronized with this
physical state on every potential point when the state changes. This
solves the issue where user might load an amiibo before NFC service
initializes, or remove an amiibo after NFC service shutdown, which
previously causes inconsistent state change.
Also removed std::atomic on nfc_tag_state, because
1. It is already protected by g_hle_lock
2. It wasn't properly used in the code anyway. For example, there are
many double loading on this variable, which effectively make it
non-atomic.
Previously, telemetry results couldn't give a good estimate for
performance over time, because it didn't include any fields related to
performance. With this, devs should be able to query metabase for mean
frametime to check for performance regressions after a change is made.
For better tracking of performance regressions on incoming changes, this
change adds a way to dump frametime to file by changing an ini config
option. This is intentionally hidden as its only useful to a small
number of individuals, and not really applicable to the general
userbase.
Two PBOs are used to speed up pixel copying process. To avoid getting the wrong speed/FPS, a new parameter is added to DrawScreens about whether to increase the frame count.
The speed limiter being a frame limiter is an implmentation detail and can be changed in the future. What user care about is that it limit the emulation speed in genenral (not just graphics but also audio+input)
* yuzu/about_dialog: Specify string conversions explicitly
Specifies the conversions explicitly to avoid implicit conversions from
const char* to QString. This makes it easier to disable implicit QString
conversions in the future.
In this case, the implicit conversion was technically wrong as well. The
implicit conversion treats the input strings as ASCII characters. This
would result in an incorrect conversion being performed in the rare case
a branch name was created with a non-ASCII Unicode character, likely
resulting in junk being displayed.
* yuzu/main: Move window title updating logic to its own function
For similar reasons to the previous change, we move this to a single
function, so we don't need to duplicate the conversion logic in several
places within main.cpp.
* Add Anaglyph 3D
Change 3D slider in-game
Change shaders while game is running
Move shader loading into function
Disable 3D slider setting when stereoscopy is off
The rest of the shaders
Address review issues
Documentation and minor fixups
Forgot clang-format
Fix shader release on SDL2-software rendering
Remove unnecessary state changes
Respect 3D factor setting regardless of stereoscopic rendering
Improve shader resolution passing
Minor setting-related improvements
Add option to toggle texture filtering
Rebase fixes
* One final clang-format
* Fix OpenGL problems
Require and assume that override exheaders are decrypted for
consistency with Luma's loader behaviour and to ensure consistent
behaviour regardless of whether the NCCH is marked as encrypted or not.
Currently, exheader overriding with an encrypted NCCH would cause
the title ID checking heuristic to mistakenly disable encryption,
which would then make exefs loading fail.
Allows the configuration code to build successfully with implicit string
conversions disabled.
Also makes default_hotkeys internally linked:
Given the array is a private static array, we can just make it
internally linked to hide it from external code. This also allows us to
remove an inclusion within the header.
* yuzu/bootmanager: Remove unnecessary pointer casts
We can just invoke these functions by qualifying the object name before
the function.
* yuzu/bootmanager: unsigned -> u32
Same thing (for platforms we support), less reading.
* yuzu/bootmanager: Default EmuThread's destructor in the cpp file
This class contains non-trivial members, so we should default the
destructor's definition within the cpp file.
* yuzu/bootmanager: Treat the resolution factor as a u32
Treating it as a u16 can result in a sign-conversion warning when
performing arithmetic with it, as u16 promotes to an int when aritmetic
is performed on it, not unsigned int.
This also makes the interface more uniform, as the layout interface now
operates on u32 across the board.
* yuzu/bootmanager: Log out screenshot destination path
We can make this message more meaningful by indicating the location the
screenshot has been saved to. We can also log out whenever a screenshot
could not be saved (e.g. due to filesystem permissions or some other
reason).
* Fix compilation
This allows an IPS patch to edit .bss. This is useful for game patches
that need to add code, as putting things in .bss allows adding new code
*without* editing .code and thus without having to relocate everything.
Previously we were building with MBCS, which is pretty undesirable. We
want the application to be Unicode-aware in general.
Currently, we make the command line variant of yuzu use ANSI variants of
the non-standard getopt functions that we link in for Windows, given we
only have an ANSI option-set.
We should really replace getopt with a library that we make all build
types of yuzu link in, but this will have to do for the time being.
Enforces the use of the proper URL resolution functions. e.g.
url = some_local_path_string;
should actually be:
url = QUrl::fromLocalPath(some_local_path_string);
etc.
This makes it harder to cause bugs when operating with both strings and
URLs at the same time.
Other overloads of start() are considerably much safer to use if we ever
need this in the future and need to pass arguments to the program, given
it contains separate parameters for the program path and the arguments
themselves, whereas this unsafe overload contains both as a single
string.
Given the alternatives are much safer, we can disable this.
Currently, having a replacement code.bin causes Citra to crash as it is
trying to load icon data from code.bin because of a typo. This commit
fixes that typo.
This attempts to fix segfault in some tests where page table is set before initializing cpu core (intended behaviour? might be worth a check...)
see: src/tests/core/arm/arm_test_common.cpp
see: src/tests/core/arm/dyncom/arm_dyncom_vfp_tests.cpp
It will both change the page table in memory and notify the CPU about the change by itself. This way there is no need to call memory.SetCurrentPageTable() when kernel.setCurrentProcess() and the management is kept internally in the kernel
By default, MSVC doesn't use standards-compliant volatile semantics.
This makes it behave in a standards-compliant manner, making
expectations more uniform across compilers.
The C++ standard allows constexpr variables declared with the extern
keyword to have external linkage. Previously MSVC wasn't abiding by
this. This just makes the compiler more standards compliant during
builds.
Given we currently don't make use of anything that would break by this,
this is safe to enable.
This is performing more work than would otherwise be necessary during
VMManager's destruction. All we actually want to occur in this scenario
is for any allocated memory to be freed, which will happen automatically
as the VMManager instance goes out of scope.
Anything else being done is simply unnecessary work.
This makes cpu_core and memory being completely independent components inside the system, having a simpler and more understandable initialization process
The thread which casues page table changes in memory will be responsible to notify the cpu_core too
* CMakeLists: Move compilation flags into the src directory
We generally shouldn't be hijacking CMAKE_CXX_FLAGS, etc as a means to
append flags to the targets, since this adds the compilation flags to
everything, including our externals, which can result in weird issues
and makes the build hierarchy fragile.
Instead, we want to just apply these compilation flags to our targets,
and let those managing external libraries to properly specify their
compilation flags.
This also results in us not getting as many warnings, as we don't raise
the warning level on every external target.
* CMakeLists: Move off of modifying CMAKE_*-related flags
Modifying CMAKE_* related flags directly applies those changes to every
single CMake target. This includes even the targets we have in the
externals directory.
So, if we ever increased our warning levels, or enabled particular ones,
or enabled any other compilation setting, then this would apply to
externals as well, which is often not desirable.
This makes our compilation flag setup less error prone by only applying
our settings to our targets and leaving the externals alone entirely.
This also means we don't end up clobbering any provided flags on the
command line either, allowing users to specifically use the flags they
want.
Makes the dependency explicit in the TelemetrySession's interface
instead of making it a hidden dependency.
This also revealed a hidden issue with the way the telemetry session was
being initialized. It was attempting to retrieve the app loader and log
out title-specific information. However, this isn't always guaranteed to
be possible.
During the initialization phase, everything is being constructed. It
doesn't mean an actual title has been selected. This is what the Load()
function is for. This potentially results in dead code paths involving
the app loader. Instead, we explicitly add this information when we know
the app loader instance is available.
A checkbox is able to be tri-state, giving it three possible activity
types, so in the connect call here, it would actually be truncating an
int into a bool.
Instead, we can just listen on the toggled() signal, which passes along
a bool, not an int.
* common/file_util: Make IOFile's WriteString take a std::string_view
We don't need to force the usage of a std::string here, and can instead
use a std::string_view, which allows writing out other forms of strings
(e.g. C-style strings) without any unnecessary heap allocations.
* common/file_util: Remove unnecessary c_str() calls
The file stream open functions have supported std::string overloads
since C++11, so we don't need to use c_str() here. Same behavior, less
code.
* common/file_util: Make ReadFileToString and WriteStringToFile consistent
Makes the parameter ordering consistent, and also makes the filename
parameter a std::string. A std::string would be constructed anyways with
the previous code, as IOFile's only constructor with a filepath is one
taking a std::string.
We can also make WriteStringToFile's string parameter utilize a
std::string_view for the string, making use of our previous changes to
IOFile.
* common/file_util: Remove duplicated documentation comments
These are already present within the header, so they don't need to be
repeated in the cpp file.
* common/file_util: Make GetCurrentDir() return a std::optional
nullptr was being returned in the error case, which, at a glance may
seem perfectly OK... until you realize that std::string has the
invariant that it may not be constructed from a null pointer. This
means that if this error case was ever hit, then the application would
most likely crash from a thrown exception in std::string's constructor.
Instead, we can change the function to return an optional value,
indicating if a failure occurred.
* common/file_util: Remove unnecessary return at end of void StripTailDirSlashes()
While we're at it, also invert the conditional into a guard clause.
critical() is intended for critical/fatal errors that threaten the
overall stability of an application. A user entering a conflicting key
sequence is neither of those.
Allows for things such as:
auto rect = Common::Rectangle{0, 0, 0, 0};
as opposed to being required to explicitly write out the underlying
type, such as:
auto rect = Common::Rectangle<int>{0, 0, 0, 0};
The only requirement for the deduction is that all constructor arguments
be the same type.
The previous code was all "smushed" together wasn't really grouped
together that well.
This spaces things out and separates them by relation to one another,
making it easier to visually parse the individual sections of code that
make up the constructor.
Without passing in a parent, this can result in focus being stolen from
the dialog in certain cases.
Example:
On Windows, if the logging window is left open, the logging Window will
potentially get focus over the hotkey dialog itself, since it brings all
open windows for the application into view. By specifying a parent, we
only bring windows for the parent into view (of which there are none,
aside from the hotkey dialog).
Avoids dumping all of the core settings machinery into whatever files
include this header. Nothing inside the header itself actually made use
of anything in settings.h anyways.
* common/thread: Remove unused functions
Many of these functions are carried over from Dolphin (where they aren't
used anymore). Given these have no use (and we really shouldn't be
screwing around with OS-specific thread scheduler handling from the
emulator, these can be removed.
The function for setting the thread name is left, however, since it can
have debugging utility usages.
* input_common/sdl: Use a type alias to shorten declaration of GetPollers
Just makes the definitions a little bit more tidy.
* input_common/sdl: Correct return values within implementations of GetPollers()
In both cases, we weren't actually returning anything, which is
undefined behavior.
* yuzu/debugger/graphics_surface: Fill in missing surface format listings
Fills in the missing surface types that were marked as unknown. The
order corresponds with the TextureFormat enum within
video_core/texture.h.
We also don't need to all of these strings as translatable (only the
first string, as it's an English word).
* yuzu/debugger/graphics_surface: Clean up connection overload deduction
We can utilize qOverload with the signal connections to make the
function deducing a little less ugly.
* yuzu/debugger/graphics_surface: Tidy up SaveSurface
- Use QStringLiteral where applicable.
- Use const where applicable
- Remove unnecessary precondition check (we already assert the pixbuf
being non null)
* yuzu/debugger/graphics_surface: Display error messages for file I/O errors
* core: Add missing override specifiers where applicable
Applies the override specifier where applicable. In the case of
destructors that are defaulted in their definition, they can
simply be removed.
This also removes the unnecessary inclusions being done in audin_u and
audrec_u, given their close proximity.
* kernel/thread: Make parameter of GetWaitObjectIndex() const qualified
The pointed to member is never actually modified, so it can be made
const.
* kernel/thread: Avoid sign conversion within GetCommandBufferAddress()
Previously this was performing a u64 + int sign conversion. When dealing
with addresses, we should generally be keeping the arithmetic in the
same signedness type.
This also gets rid of the static lifetime of the constant, as there's no
need to make a trivial type like this potentially live for the entire
duration of the program.
* kernel/codeset: Make CodeSet's memory data member a regular std::vector
The use of a shared_ptr is an implementation detail of the VMManager
itself when mapping memory. Because of that, we shouldn't require all
users of the CodeSet to have to allocate the shared_ptr ahead of time.
It's intended that CodeSet simply pass in the required direct data, and
that the memory manager takes care of it from that point on.
This means we just do the shared pointer allocation in a single place,
when loading modules, as opposed to in each loader.
* kernel/wait_object: Make ShouldWait() take thread members by pointer-to-const
Given this is intended as a querying function, it doesn't make sense to
allow the implementer to modify the state of the given thread.
This is a compile definition introduced in Qt 4.8 for reducing the total
potential number of strings created when performing string
concatenation. This allows for less memory churn.
This can be read about here:
https://blog.qt.io/blog/2011/06/13/string-concatenation-with-qstringbuilder/
For a change that isn't source-compatible, we only had one occurrence
that actually need to have its type clarified, which is pretty good, as
far as transitioning goes.
* Set accepted EULA version to max value
CFG: write the max value of 0x7F7F to the default cfg savegame and
auto update on init
CECD: Actually read the EULA version from CFG
* HTTP_C: Implement SetClientCertContext and GetSSLError; Stubbed BeginRequest and BeginRequestAsync
* HTTP_C: Move logs to beginning of function calls
The multiplayer state object and dialogs hold a (modified) game list model, but it isn't updated when the actual game list changes. This updates the multiplayer dialogs with the new game list when it got repopulated.
Allows updating the credentials of the announce session, thus allowing credentials changes to be reflected before citra restart. To avoid race conditions and web errors (you can only update the room that you created, i.e. changing credentials halfway will make it break), now you can only use the Citra Web Services settings when not hosting a public room.
The `Register()` function can now handle error results and the error will be passed immediately to the Qt frontend, instead of being ignored silently and failing later with a "Room is not registered".
The backend is not used until we decide to submit the testcase/telemetry, and creating it early prevents users from updating the credentials properly while the games are running.
Keeps the return type consistent with the function name. While we're at
it, we can also reduce the amount of boilerplate involved with handling
these by using structured bindings.
Some objects declare their handle type as const, while others declare it
as constexpr. This makes the const ones constexpr for consistency, and
prevent unexpected compilation errors if these happen to be attempted to be
used within a constexpr context.
Uses arithmetic that can be identified more trivially by compilers for
optimizations. e.g. Rather than shifting the halves of the value and
then swapping and combining them, we can swap them in place.
e.g. for the original swap32 code on x86-64, clang 8.0 would generate:
mov ecx, edi
rol cx, 8
shl ecx, 16
shr edi, 16
rol di, 8
movzx eax, di
or eax, ecx
ret
while GCC 8.3 would generate the ideal:
mov eax, edi
bswap eax
ret
now both generate the same optimal output.
MSVC used to generate the following with the old code:
mov eax, ecx
rol cx, 8
shr eax, 16
rol ax, 8
movzx ecx, cx
movzx eax, ax
shl ecx, 16
or eax, ecx
ret 0
Now MSVC also generates a similar, but equally optimal result as clang/GCC:
bswap ecx
mov eax, ecx
ret 0
====
In the swap64 case, for the original code, clang 8.0 would generate:
mov eax, edi
bswap eax
shl rax, 32
shr rdi, 32
bswap edi
or rax, rdi
ret
(almost there, but still missing the mark)
while, again, GCC 8.3 would generate the more ideal:
mov rax, rdi
bswap rax
ret
now clang also generates the optimal sequence for this fallback as well.
This is a case where MSVC unfortunately falls short, despite the new
code, this one still generates a doozy of an output.
mov r8, rcx
mov r9, rcx
mov rax, 71776119061217280
mov rdx, r8
and r9, rax
and edx, 65280
mov rax, rcx
shr rax, 16
or r9, rax
mov rax, rcx
shr r9, 16
mov rcx, 280375465082880
and rax, rcx
mov rcx, 1095216660480
or r9, rax
mov rax, r8
and rax, rcx
shr r9, 16
or r9, rax
mov rcx, r8
mov rax, r8
shr r9, 8
shl rax, 16
and ecx, 16711680
or rdx, rax
mov eax, -16777216
and rax, r8
shl rdx, 16
or rdx, rcx
shl rdx, 16
or rax, rdx
shl rax, 8
or rax, r9
ret 0
which is pretty unfortunate.
Allows the compiler to inform when the result of a swap function is
being ignored (which is 100% a bug in all usage scenarios). We also mark
them noexcept to allow other functions using them to be able to be
marked as noexcept and play nicely with things that potentially inspect
"nothrowability".
Including every OS' own built-in byte swapping functions is kind of
undesirable, since it adds yet another build path to ensure compilation
succeeds on.
Given we only support clang, GCC, and MSVC for the time being, we can
utilize their built-in functions directly instead of going through the
OS's API functions.
This shrinks the overall code down to just
if (msvc)
use msvc's functions
else if (clang or gcc)
use clang/gcc's builtins
else
use the slow path
The template type here is actually a forwarding reference, not an rvalue
reference in this case, so it's more appropriate to use std::forward to
preserve the value category of the type being moved.
These can just be passed regularly, now that we use fmt instead of our
old logging system.
While we're at it, make the parameters to MakeFunctionString
std::string_views.
Reduces the potential amount of rebuilding necessary if any headers
change. In particular, we were including a header from the core library
when we don't even link the core library to the web_service library, so
this also gets rid of an indirect dependency.
Since C++17, the introduction of deduction guides for locking facilities
means that we no longer need to hardcode the mutex type into the locks
themselves, making it easier to switch mutex types, should it ever be
necessary in the future.
This reduces the boilerplate that services have to write out the current thread explicitly. Using current thread instead of client thread is also semantically incorrect, and will be a problem when we implement multicore (at which time there will be multiple current threads)
We really don't need to pull in several headers of boost related
machinery just to perform the erase-remove idiom (particularly with
C++20 around the corner, which adds universal container std::erase and
std::erase_if, which we can just use instead).
With this, we don't need to link in anything boost-related into common.
In these cases the system object is nearby, and in the other, the
long-form of accessing the telemetry instance is already used, so we can
get rid of the use of the global accessor.
Moves local global state into the Impl class itself and initializes it
at the creation of the instance instead of in the function.
This makes it nicer for weakly-ordered architectures, given the
CreateEntry() class won't need to have atomic loads executed for each
individual call to the CreateEntry class.
This makes the class much more flexible and doesn't make performing
copies with classes that contain a bitfield member a pain.
Given BitField instances are only intended to be used within unions, the
fact the full storage value would be copied isn't a big concern (only
sizeof(union_type) would be copied anyways).
While we're at it, provide defaulted move constructors for consistency.
This causes a reference cycle because ServerPort also holds a shared pointer to SessionRequestHandler (inherited by ServiceFrameworkBase). Given that the member port is never used in ServiceFrameworkBase, we can simply remove it. The port object is kept alive by ServiceManager|KernelSystem::named_ports -> ClientPort -> ServerPort
Services can hold kernel objects and do cleanup upon destruction, so we need to keep the kernel alive longer. The new order approximnately resembles the reverse construction order. I will revisit the ordering issue and make it less error-prone after global state cleanup
When making the initial implementation, I forgot to add the series variable to the AmiiboConfig struct.
With this PR it is added and many of the AmiiboConfig fields get their proper values now.
The loading of the Amiibo data that is added here has been hwtested.
This fixes Amiibos in Yoshis Woolly World, Smash (partially) and probably other games too.
wwylele / 白疾風Today at 6:14 PM
I doubt the performance of constructing regex everytime the function is called
Is TrimSourcePath only called by logging? if so, you can move the implementation into logging, and cache the regex object into global
This function is probably too specific to be in common anyway
Previously this check is in GetSurface (if (addr == 0)). This worked fine because GetTextureSurface directly forwarded the address value to GetSurface. However, now with mipmap support, GetTextureSurface would call GetSurface several times with different address offset, resulting some >0 but still invalid address in case the input is 0. We should error out early on invalid address instead of sending it furthor down which would cause invalid memory access
* gdbstub: fix IsMemoryBreak() returning false while connected to client
As a result, the only existing codepath for a memory watchpoint hit to break into GDB (InterpeterMainLoop, GDB_BP_CHECK, ARMul_State::RecordBreak) is finally taken,
which exposes incorrect logic* in both RecordBreak and ServeBreak.
* a blank BreakpointAddress structure is passed, which sets r15 (PC) to NULL
* gdbstub: DynCom: default-initialize two members/vars used in conditionals
* gdbstub: DynCom: don't record memory watchpoint hits via RecordBreak()
For now, instead check for GDBStub::IsMemoryBreak() in InterpreterMainLoop and ServeBreak.
Fixes PC being set to a stale/unhit breakpoint address (often zero) when a memory watchpoint (rwatch, watch, awatch) is handled in ServeBreak() and generates a GDB trap.
Reasons for removing a call to RecordBreak() for memory watchpoints:
* The``breakpoint_data`` we pass is typed Execute or None. It describes the predicted next code breakpoint hit relative to PC;
* GDBStub::IsMemoryBreak() returns true if a recent Read/Write operation hit a watchpoint. It doesn't specify which in return, nor does it trace it anywhere. Thus, the only data we could give RecordBreak() is a placeholder BreakpointAddress at offset NULL and type Access. I found the idea silly, compared to simply relying on GDBStub::IsMemoryBreak().
There is currently no measure in the code that remembers the addresses (and types) of any watchpoints that were hit by an instruction, in order to send them to GDB as "extended stop information."
I'm considering an implementation for this.
* gdbstub: Change an ASSERT to DEBUG_ASSERT
I have never seen the (Reg[15] == last_bkpt.address) assert fail in practice, even after several weeks of (locally) developping various branches around GDB. Only leave it inside Debug builds.
udp_server might not be created due to error (occupied port etc.), in which case its destructor and thread-ending call chain will not be excuted in Server::Stop. However, the ending packet still need to be send no matter udp is on or not, so move it to Server::Stop
MSVC does not seem to like using constexpr values in a lambda that were declared outside of it.
Previously on MSVC build the hotkeys to inc-/decrease the speed limit were not working correctly because in the lambda the SPEED_LIMIT_STEP had garbage values.
After googling around a bit I found: https://github.com/codeplaysoftware/computecpp-sdk/issues/95 which seems to be a similar issue.
Trying the suggested fix to make the variable static constexpr also fixes the bug here.
Makes it consistent with the regular standard containers in terms of
size representation. This also gets rid of dependence on our own
type aliases, removing the need for an include.
The necessity of this parameter is dubious at best, and in 2019 probably
offers completely negligible savings as opposed to just leaving this
enabled. This removes it and simplifies the overall interface.
video_core: shorten GetGLSLVersionString
video_core: make GLES version and extensions consistent
video_core: move some logic to LoadShader
video_core: deduplicate fragment shader precision specifier
